Adhesion properties of UV crosslinked polystyrene-block-polybutadiene-block-polystyrene copolymer and tackifier mixture

The peel and tack properties of mixtures of polystyrene-block-polybutadiene-block-polystyrene (SBS) and a tackifier were investigated after these were crosslinked by ultraviolet (UV) irradiation at various amounts of benzophenone (BP) as a photoinitiator and trimethylolpropane mercaptopropionate (TRIS) as a crosslinking agent.The degree of crosslinking of polybutadiene (PB) block in the SBS mixture was qualitatively estimated from the amount of gel fraction as well as the change in the glass transition temperature of the PB block. The crosslinking of the PB block was done within 3 min after UV irradiation and the peel strength of crosslinked specimens was as low as 45[percnt] of specimens without crosslinking. Nano-tack and bulk tack properties as well as the surface tension of mixtures were measured depending upon amounts of BP and TRIS.     

Durability of glass‐fiber‐reinforced polymer nanocomposites in an alkaline environment

This study was conducted to determine the effect of clay content in GFRP (glass‐fiber‐reinforced polymer) composite samples as they were aged in an alkaline solution. Two kinds of GFRP composite samples were prepared. One was E‐glass‐fiber‐reinforced vinyl ester polymer, and the other was nano‐GFRP composites prepared with the addition of 1 and 2 wt% of montmorillonite clay to the polymer matrix. These samples were aged in alkaline solution of pH 13.2 with and without sustained load. The load was 1335 N or 18.7% of the tensile strength of the composite samples. The aging was evaluated by measuring the reduction in tensile strength after 6 months. Also, absorption of alkaline solution into the plain and nano‐GFRP samples was investigated so as to elucidate the diffusion behaviors. It was found that for a short exposure time (e.g. 1 month) and without sustained load, dispersing 2 wt% of the nanoclay in the polymer matrix of the GFRP samples reduces the diffusivity by 39%. However, with the application of sustained load, the glass fiber composite samples deteriorate more with increasing clay content. The reduction in tensile strength was 7.1%, 12.1%, and 18.1% for the samples containing 0, 1, and 2 wt% of clay, respectively. J. VINYL. ADDIT. TECHNOL., 12:25–32, 2006. © 2006 Society of Plastics Engineers     

沧州市2006~2016年春季大到暴雨特征分析

根据沧州市92个雨量监测站2006~2016年间的春季大到暴雨资料,研究了11年来沧州市春季大到暴雨的特征指标、时间变化规律以及空间变化趋势.研究发现:沧州市11年间春季大到暴雨强度(站点数)的时间变化呈抛物线趋势,与沧州市年降水量变化趋势非常接近;沧州市春季大到暴雨的空间分布情况为各县市均有发生,但分布不均匀,子牙新河沿岸出现高值区,以子牙新河为界,向两侧递减.     

Temperature and grain size dependence of superplasticity in a Zn−0.3wt.%Al alloy

The superplastic deformation behavior of quasi-single phase Zn-0.3 wt. %Al was investigated. A series of load relaxation and tensile tests was conducted at various temperatures ranging from RT (20 °C) to 200 °C. The recently proposed internal variable theory of structural superplasticity was applied. The flow curves obtained from load relaxation tests were shown to consist of contributions from interface sliding (IS) and accommodating plastic deformation. In the case of quasi-single phase Zn-0.3 wt.% Al alloy with an average agrain size of 1 μm, the IS behavior could be described as a viscous flow process characterized by a power index of M_g=0.5. A large elongation of about 1400% was obtained at room temperature and the strain rate sensitivity parameter was about 0.4. Although relatively large-grained (10 μm) single phase alloy showed a high value of strain rate sensitivity comparable to that of fine-grained alloy at very low strain rate range, IS was not expected from the analysis based on the internal variable theory of structural superplasticity at room temperature. As the temperature increased above 100 °C, however, the contribution from IS was observed at a very low strain rate range. A high elongation of ∼400% was obtained in a specimen of 10-μm-grain-size at 200 °C under a strain rate of 2×10⁻⁴/sec. Jointly appointed at Center for Advanced Aerospace Materials (CAAM)     

Image processing acceleration for intelligent unmanned aerial vehicle on mobile GPU

In this paper, we present an algorithm for providing visually-guided unmanned aerial vehicle (UAV) control using visual information that is processed on a mobile graphic processing unit (GPU). Most real-time machine vision applications for UAVs exploit low-resolution images because the shortage of computational resources comes from size, weight and power issue. This leads to the limitation that the data are insufficient to provide the UAV with intelligent behavior. However, GPUs have emerged as inexpensive parallel processors that are capable of providing high computational power in mobile environments. We present an approach for detecting and tracking lines that use a mobile GPU. Hough transform and clustering techniques were used for robust and fast tracking. We achieved accurate line detection and faster tracking performance using the mobile GPU as compared with an x86 i5 CPU. Moreover, the average results showed that the GPU provided approximately five times speedup as compared to an ARM quad-core Cortex-A15. We conducted a detailed analysis of the performance of proposed tracking and detection algorithm and obtained meaningful results that could be utilized in real flight.     

Sources and leaching of manganese and iron in the Saigon River Basin, Vietnam

High concentrations of manganese and iron in the Saigon River are major problems for the water supply in Ho Chi Minh City (HCMC), Viet Nam. To identify their sources and leaching processes, we surveyed water quality along the Saigon River and ran batch leaching tests using soil and sediment samples. Two important leaching processes were identified: acidic leaching from acid sulfate soil (ASS) in the middle reaches of the river, and Mn dissolution and Fe reduction from sediments in the downstream reaches. Low pH caused the concurrent release of Fe and Mn from the ASS. In contrast, anoxia caused the release of Fe but not Mn from the sediments, whereas low pH facilitated Mn dissolution. Sediments are a more important source of Mn because of their higher Mn contents (10 times) and release rates (14 times) than those from ASS.     

Tensor Clustering for Rendering Many‐Light Animations

Rendering animations of scenes with deformable objects, camera motion, and complex illumination, including indirect lighting and arbitrary shading, is a long‐standing challenge. Prior work has shown that complex lighting can be accurately approximated by a large collection of point lights. In this formulation, rendering of animation sequences becomes the problem of efficiently shading many surface samples from many lights across several frames. This paper presents a tensor formulation of the animated many‐light problem, where each element of the tensor expresses the contribution of one light to one pixel in one frame. We sparsely sample rows and columns of the tensor, and introduce a clustering algorithm to select a small number of representative lights to efficiently approximate the animation. Our algorithm achieves efficiency by reusing representatives across frames, while minimizing temporal flicker. We demonstrate our algorithm in a variety of scenes that include deformable objects, complex illumination and arbitrary shading and show that a surprisingly small number of representative lights is sufficient for high quality rendering. We believe out algorithm will find practical use in applications that require fast previews of complex animation.     

Motion synthesis with decoupled parameterization

In real-time animation systems, motion interpolation techniques are widely used for their controllability and efficiency. The techniques sample the parameter space using example motions, and interpolate them to compute the blend weights corresponding to the given parameters. A main problem of the techniques is that, as the dimension n of the parameter space increases, the number of required example motions increases exponentially, i.e. O(c ⁿ ). To resolve the problem, this paper proposes to use two decoupled parameter spaces for controlling the upper body and the lower body separately. At each frame time, a parameterized motion space produces a source frame, and the target frame is synthesized by splicing the upper body of one source frame with the lower body of the other. In order to have the two source frames correlated with each other, a time-warping scheme has been developed. Furthermore, in order to handle the dynamic properties of the parameter samples of the upper body, we have developed an approximation technique for quickly determining the sample positions in its parameter space. This decoupled parameterization method alleviates the complexity problem, e.g. from O(c ⁶) to O(c ³), while providing the users with the capability of convenient control over the character.     

Design and Implementation of a Ubiquitous Robotic Space

This paper describes a concerted effort to design and implement a robotic service framework. The proposed framework is comprised of three conceptual spaces: physical, semantic, and virtual spaces, collectively referred to as a ubiquitous robotic space. We implemented a prototype robotic security application in an office environment, which confirmed that the proposed framework is an efficient tool for developing a robotic service employing IT infrastructure, particularly for integrating heterogeneous technologies and robotic platforms.     

Toward Stable Cycling of a Cost-Effective Cation-Disordered Rocksalt Cathode via Fluorination

The recently developed Li-excess cation-disordered rock salts (DRXs) exhibit an excellent chemical diversity for the development of alternative Co/Ni-free high-energy cathodes. Herein, the synthesis of a highly fluorinated DRX cathode, Li_1.2Mn_0.6Ti_0.2O_1.8F_0.2, based on cost-effective and earth-abundant transition metals, via a solid-state reaction, is reported. The fluorinated DRX cathode using ammonium fluoride precursor exhibits more uniform particle size and delivers a specific discharge capacity of 233 mAh g⁻¹ and specific energy of 754 Wh kg⁻¹, with 206 mAh g⁻¹ retained after 200 cycles. The combined synchrotron X-ray absorption spectroscopy and resonant inelastic X-ray scattering spectroscopy analysis reveals that the remarkable cycling performance is attributed to the high fluorination and thus enhanced Mn content, enabling the utilization of more Mn redox than the oxide analog. This study demonstrates a great promise to develop next-generation cost-effective DRX cathodes with enhanced capacity retention for high-energy Li-ion batteries.